CCNA1 v6.0 Final Exam Answer 2017 100%
-
1. Question
What is a characteristic of a fault tolerant network? -
2. Question
Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types? -
3. Question
What is a benefit of using cloud computing in networking? -
4. Question
What is the function of the shell in an OS? -
5. Question
Which connection provides a secure CLI session with encryption to a Cisco switch? -
6. Question
A network technician is attempting to configure an interface by entering the following command: SanJose(config)# ip address 192.168.2.1 255.255.255.0. The command is rejected by the device. What is the reason for this? -
7. Question
An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command. What is the purpose of using these keystrokes? -
8. Question
Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses a console connection to connect to the switch, which password is needed to access user EXEC mode?
CCNA1 v6.0 Final Exam Form A 002
-
9. Question
On which switch interface would an administrator configure an IP address so that the switch can be managed remotely? -
10. Question
What protocol is responsible for controlling the size of segments and the rate at which segments are exchanged between a web client and a web server? -
11. Question
What is an advantage to using a protocol that is defined by an open standard? -
12. Question
What are two benefits of using a layered network model? (Choose two.) -
13. Question
Which two OSI model layers have the same functionality as two layers of the TCP/IP model? (Choose two.) -
14. Question
Which name is assigned to the transport layer PDU? -
15. Question
A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized? -
16. Question
A network administrator is measuring the transfer of bits across the company backbone for a mission critical financial application. The administrator notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.) -
17. Question
What is a characteristic of UTP cabling? -
18. Question
What are two characteristics of fiber-optic cable? (Choose two.) -
19. Question
What is a characteristic of the LLC sublayer? -
20. Question
A network team is comparing physical WAN topologies for connecting remote sites to a headquarters building. Which topology provides high availability and connects some, but not all, remote sites? -
21. Question
What method is used to manage contention-based access on a wireless network? -
22. Question
What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.) -
23. Question
What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address? -
24. Question
Which frame forwarding method receives the entire frame and performs a CRC check to detect errors before forwarding the frame? -
25. Question
Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be in the frame when it leaves host A?
CCNA1 v6.0 Final Exam Form A 001
-
26. Question
What addresses are mapped by ARP? -
27. Question
What are two services provided by the OSI network layer? (Choose two.) -
28. Question
What are two functions of NVRAM? (Choose two.) -
29. Question
Refer to the exhibit. What will be the result of entering this configuration the next time a network administrator connects a console cable to the router and no additional commands have been entered?
CCNA1 v6.0 Final Exam Form A 003
-
30. Question
What is the dotted decimal representation of the IPv4 address 11001011.00000000.01110001.11010011? -
31. Question
What are three characteristics of multicast transmission? (Choose three.) -
32. Question
What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.) -
33. Question
What purpose does NAT64 serve in IPv6? -
34. Question
What is the most compressed representation of the IPv6 address 2001:0000:0000:abcd:0000:0000:0000:0001? -
35. Question
Which range of link-local addresses can be assigned to an IPv6-enabled interface? -
36. Question
How many valid host addresses are available on an IPv4 subnet that is configured with a /26 mask? -
37. Question
A site administrator has been told that a particular network at the site must accommodate 126 hosts. Which subnet mask would be used that contains the required number of host bits?
-
38. Question
Which subnet would include the address 192.168.1.96 as a usable host address? -
39. Question
Which statement is true about variable-length subnet masking? -
40. Question
Which scenario describes a function provided by the transport layer? -
41. Question
A user opens three browsers on the same PC to access http://www.cisco.com to search for certification course information. The Cisco web server sends a datagram as a reply to the request from one of the web browsers. Which information is used by the TCP/IP protocol stack in the PC to identify which of the three web browsers should receive the reply? -
42. Question
What are two ways that TCP uses the sequence numbers in a segment? (Choose two.) -
43. Question
Which two tasks are functions of the presentation layer? (Choose two.) -
44. Question
What is a key characteristic of the peer-to-peer networking model? -
45. Question
A technician can ping the IP address of the web server of a remote company but cannot successfully ping the URL address of the same web server. Which software utility can the technician use to diagnose the problem? -
46. Question
Which domain name would be an example of a top-level domain? -
47. Question
A PC obtains its IP address from a DHCP server. If the PC is taken off the network for repair, what happens to the IP address configuration? -
48. Question
A wireless host needs to request an IP address. What protocol would be used to process the request? -
49. Question
Which example of malicious code would be classified as a Trojan horse? -
50. Question
When applied to a router, which command would help mitigate brute-force password attacks against the router? -
51. Question
A network technician suspects that a particular network connection between two Cisco switches is having a duplex mismatch. Which command would the technician use to see the Layer 1 and Layer 2 details of a switch port? -
52. Question
Where are Cisco IOS debug output messages sent by default? -
53. Question
Match the description with the associated IOS mode. (Not all options are used.)
CCNA1 v6.0 Final Exam Form A 01
-
54. Question
Refer to the exhibit. Match the packets with their destination IP address to the exiting interfaces on the router. (Not all targets are used.)
CCNA1 v6.0 Final Exam Form A 004
CCNA1 v6.0 Final Exam Form A 02
CCNA1 Final Exam Form B – Online Assessment
-
1. Question
A company is expanding its business to other countries. All branch offices must remain connected to corporate headquarters at all times. Which network technology is required to support this requirement? -
2. Question
A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used? -
3. Question
How does quality of service help a network support a wide range of applications and services? -
4. Question
On which switch interface would an administrator configure an IP address so that the switch can be managed remotely? -
5. Question
After making configuration changes on a Cisco switch, a network administrator issues a copy running-config startup-config command. What is the result of issuing this command? -
6. Question
Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator has already logged into a Telnet session on the switch, which password is needed to access privileged EXEC mode?
CCNA1 v6.0 Final Exam Form B 001
-
7. Question
Which connection provides a secure CLI session with encryption to a Cisco switch? -
8. Question
A network technician is attempting to configure an interface by entering the following command: SanJose(config)# ip address 192.168.2.1 255.255.255.0. The command is rejected by the device. What is the reason for this? -
9. Question
What function does pressing the Tab key have when entering a command in IOS? -
10. Question
What protocol is responsible for controlling the size of segments and the rate at which segments are exchanged between a web client and a web server? -
11. Question
What layer is responsible for routing messages through an internetwork in the TCP/IP model? -
12. Question
Which statement accurately describes a TCP/IP encapsulation process when a PC is sending data to the network? -
13. Question
What unique address is embedded in an Ethernet NIC and used for communication on an Ethernet network? -
14. Question
A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized? -
15. Question
A network administrator is measuring the transfer of bits across the company backbone for a mission critical financial application. The administrator notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.) -
16. Question
Which procedure is used to reduce the effect of crosstalk in copper cables? -
17. Question
What is a characteristic of the LLC sublayer? -
18. Question
What method is used to manage contention-based access on a wireless network? -
19. Question
During the encapsulation process, what occurs at the data link layer for a PC connected to an Ethernet network? -
20. Question
What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.) -
21. Question
What are two characteristics of Ethernet MAC addresses? (Choose two.) -
22. Question
If a device receives an Ethernet frame of 60 bytes, what will it do? -
23. Question
What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address? -
24. Question
Under which two circumstances will a switch flood a frame out of every port except the port that the frame was received on? (Choose two.) -
25. Question
Which switching method has the lowest level of latency? -
26. Question
Which two commands can be used on a Windows host to display the routing table? (Choose two.) -
27. Question
Which two functions are primary functions of a router? (Choose two.) -
28. Question
What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.) -
29. Question
What purpose does NAT64 serve in IPv6? -
30. Question
What is the binary representation of 0xCA? -
31. Question
At a minimum, which address is required on IPv6-enabled interfaces? -
32. Question
Which service provides dynamic global IPv6 addressing to end devices without using a server that keeps a record of available IPv6 addresses? -
33. Question
What is the purpose of the command ping ::1? -
34. Question
How many usable IP addresses are available on the 192.168.1.0/27 network?
-
35. Question
Which subnet would include the address 192.168.1.96 as a usable host address? -
36. Question
A network administrator wants to have the same subnet mask for three subnetworks at a small site. The site has the following networks and numbers of devices:
Subnetwork A: IP phones – 10 addresses
Subnetwork B: PCs – 8 addresses
Subnetwork C: Printers – 2 addressesWhat single subnet mask would be appropriate to use for the three subnetworks?
-
37. Question
Which statement is true about variable-length subnet masking? -
38. Question
What subnet mask is needed if an IPv4 network has 40 devices that need IP addresses and address space is not to be wasted?
-
39. Question
What are two characteristics shared by TCP and UDP? (Choose two.) -
40. Question
Why are port numbers included in the TCP header of a segment? -
41. Question
What are two ways that TCP uses the sequence numbers in a segment? (Choose two.) -
42. Question
Which two protocols operate at the highest layer of the TCP/IP protocol stack? (Choose two.) -
43. Question
Which domain name would be an example of a top-level domain? -
44. Question
What is one difference between the client-server and peer-to-peer network models? -
45. Question
Which networking model is being used when an author uploads one chapter document to a file server of a book publisher? -
46. Question
A wireless host needs to request an IP address. What protocol would be used to process the request? -
47. Question
What network service resolves the URL entered on a PC to the IP address of the destination server? -
48. Question
A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue? -
49. Question
Which firewall feature is used to ensure that packets coming into a network are legitimate responses to requests initiated from internal hosts? -
50. Question
What is one indication that a Windows computer did not receive an IPv4 address from a DHCP server? -
51. Question
Which command can an administrator issue on a Cisco router to send debug messages to the vty lines? -
52. Question
Fill in the blank.
During data communications, a host may need to send a single message to a specific group of destination hosts simultaneously. This message is in the form of a Multicast message. -
53. Question
Match the description with the associated IOS mode. (Not all options are used.)
CCNA1 v6.0 Final Exam Form B 01
-
54. Question
Refer to the exhibit. Match the packets with their destination IP address to the exiting interfaces on the router. (Not all targets are used.)
CCNA1 v6.0 Final Exam Form B 002
CCNA1 v6.0 Final Exam Form B 02