CCNA1 v7 – ITN – Packet Tracer Answers

17.8.1 Packet Tracer – Design and Build a Small Network – Physical Mode Answers Packet Tracer – Design and Build a Small Network – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Objectives Explain how a small network of directly connected segments […]
Continue reading…

17.7.7 Packet Tracer – Troubleshoot Connectivity Issues – Physical Mode Answers Packet Tracer – Troubleshoot Connectivity Issues – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/0/0/1 192.168.1.1 255.255.255.0 N/A […]
Continue reading…

13.3.2 Packet Tracer – Use Ping and Traceroute to Test Network Connectivity – Physical Mode Answers Packet Tracer – Use Ping and Traceroute to Test Network Connectivity – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP […]
Continue reading…

12.9.2 Packet Tracer – Configure IPv6 Addresses on Network Devices – Physical Mode Answers Packet Tracer – Configure IPv6 Addresses on Network Devices – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IPv6 Address Prefix Length Default […]
Continue reading…

11.10.2 Packet Tracer – Design and Implement a VLSM Addressing Scheme – Physical Mode Answers Packet Tracer – Design and Implement a VLSM Addressing Scheme – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Objectives Part 1: Examine Network Requirements Part […]
Continue reading…

10.4.4 Packet Tracer – Build a Switch and Router Network – Physical Mode Answers Packet Tracer – Build a Switch and Router Network – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address / Prefix Default […]
Continue reading…

4.7.1 Packet Tracer – Physical Layer Exploration – Physical Mode Answers Packet Tracer – Physical Layer Exploration – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Objectives         Examine Local IP Addressing Information         Trace the Path Between Source and Destination Background […]
Continue reading…

2.9.2 Packet Tracer – Basic Switch and End Device Configuration – Physical Mode Answers Packet Tracer – Basic Switch and End Device Configuration – Physical Mode (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address Subnet Mask S1 […]
Continue reading…

2.3.8 Packet Tracer – Navigate the IOS Using a Terminal Client for Console Connectivity – Physical Mode Answers Packet Tracer – Navigate the IOS Using a Terminal Client for Console Connectivity – Physical Mode Objectives Part 1: Access a Cisco Switch through the Serial Console Port Part 2: Display and Configure Basic Device Settings Part […]
Continue reading…

1.0.5 Packet Tracer – Logical and Physical Mode Exploration Answers Packet Tracer – Logical and Physical Mode Exploration (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Objectives Part 1: Investigate the Bottom Toolbar Part 2: Investigate Devices in a Wiring Closet Part 3: Connect […]
Continue reading…